IS 250 AWD V6-2.5L (4GR-FSE) (2006)
a. Engage the 4 pins.
b. Install the steering pad switch assembly with the 2 screws.
c. Connect the 2 connectors and engage the clamp.
2. INSTALL STEERING PAD
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD
7. INSPECT SRS WARNING LIGHT
8. PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.