IS 250 AWD V6-2.5L (4GR-FSE) (2006)
^
If the rear axle carrier spacer has come off, replace the rear axle carrier with a new one.
^
Make sure that the string of the SST is securely tied to the vehicle.
15. SEPARATE NO.1 REAR UPPER CONTROL ARM ASSEMBLY
a) Jack up the rear axle assembly so that the bolt on the No.1 rear upper control arm assembly can be removed.
HINT: Place a wooden block between the jack and rear axle carrier to prevent damage to the rear axle carrier.
b) Remove the bolt, washer and nut, and separate the No.1 rear upper control arm assembly from the rear axle carrier sub-assembly.
16. SEPARATE NO.1 REAR SUSPENSION ARM ASSEMBLY
a) Remove the bolt and nut, and separate the No.1 rear suspension arm assembly from the rear axle carrier sub-assembly.
NOTICE: Turn the bolt while holding the nut.
17. SEPARATE NO.2 REAR SUSPENSION ARM ASSEMBLY
a) Remove the bolt and nut, and separate the No.2 rear suspension arm assembly from the rear axle carrier sub-assembly
NOTICE: Turn the bolt while holding the nut.
18. SEPARATE TOE CONTROL LINK SUB-ASSEMBLY
a) Remove the nut from the toe control link sub-assembly.