IS 250 AWD V6-2.5L (4GR-FSE) (2006)
Fluid - A/T: Service and Repair
AUTOMATIC TRANSMISSION FLUID
ADJUSTMENT
1. BEFORE FILLING TRANSMISSION
^
This transmission requires Genuine ATF WS.
^
It is necessary to refill the transmission with the correct amount of fluid.
^
The vehicle must remain level while adjusting the transmission fluid level.
2. FILL TRANSMISSION PAN WITH FLUID
a) Remove the refill plug and overflow plug.
b) Fill the transmission through the refill hole until fluid begins to trickle out of the overflow tube.
c) Reinstall the overflow plug.
3. FILL TRANSMISSION
a) Fill the transmission with the correct amount of fluid as listed in the table.
b) Reinstall the refill plug to avoid fluid splash.
Standard Capacity
HINT: If you cannot add the listed amount of fluid, do the following:
1) Install the refill plug.