IS 250 AWD V6-2.5L (4GR-FSE) (2006)
a) Install the shift lock control ECU sub-assembly with the 2 screws.
2. INSTALL TRANSMISSION CONTROL SWITCH
a) Install the shift lever with the pin and shift lever nut.
b) Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.
c) Install the transmission control switch to the shift lever guide housing.
NOTICE: Securely engage the claws.
d) Install the shift lever guide housing with the shift lever lock pin and a new shift lever support.
NOTICE: