IS 250 AWD V6-2.5L (4GR-FSE) (2006)
e) Using a screwdriver or equivalent, hold the transfer companion flange.
f) Using a socket hexagon wrench 6 mm, fully tighten the front propeller shaft with the 6 bolts.
Torque: 25 Nm (255 kgf-cm, 18 ft. lbs.)
NOTICE: Be careful not to damage the front propeller shaft.
g) Using a screwdriver or equivalent, hold the transfer companion flange.
h) Using a socket hexagon wrench 6 mm, fully tighten the front propeller shaft with the 6 bolts.
Torque: 25 Nm (255 kgf-cm, 18 ft. lbs.)
NOTICE: Be careful not to damage the front propeller shaft.
2. INSTALL FRONT EXHAUST PIPE ASSEMBLY
3. CHECK FOR EXHAUST GAS LEAKS