IS 250 AWD V6-2.5L (4GR-FSE) (2006)
REASSEMBLY
1. INSTALL NO.1 FRONT WHEEL BEARING DUST DEFLECTOR
a) Using SST and a press, install a new No.1 front wheel bearing dust deflector.
SST 09309-36010, 09502-12010
NOTICE:
^
Dust deflector should be completely installed.
^
Be careful not to damage the dust deflector.
2. INSTALL FRONT DRIVE SHAFT BEARING (for RH Side)
a) Using SST and a steel plate, install a new front drive shaft bearing.
SST 09710-30021 (09710-03141), 09527-10011
NOTICE: Bearing should be completely installed.
b) Using a snap ring expander, install a new drive shaft bearing snap ring.
3. INSTALL FRONT DRIVE SHAFT DUST COVER LH (for LH Side)