IS 250 RWD V6-2.5L (4GR-FSE) (2007)
c. Install the front No.2 speaker assembly w/ cover with the 3 screws.
d. Engage the 2 clamps.
3. INSTALL FRONT NO.3 SPEAKER ASSEMBLY
a. Install the front No.3 speaker assembly with the 2 bolts.
HINT: Install the bolts in the order shown in the illustration.
b. Connect the connector.
4. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP
5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG