IS 250 RWD V6-2.5L (4GR-FSE) (2007)
f.
Install a new injector seal to the injector groove (injector tip side) as given in the illustration.
SST 09260-39015 (09268-03010, 09268-03020)
g. Check that the seal covers the circumference of the injector groove as given in the illustration.
SST 09260-39015 (09268-03010, 09268-03020)
NOTE: Make sure that the seal does not slip into the welded groove of the injector given in the illustration. If it does, replace it with a new
one.