IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a. Operate the power seat switch knob and move the seat to the rearmost position.
b. Using a screwdriver, detach the 2 claws and remove the front outer seat track bracket cover RH.
HINT: Tape the screwdriver tip before use.
3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH
4. REMOVE REAR OUTER SEAT TRACK COVER RH
a. Operate the power seat switch knob and move the seat to the position farthest forward.
b. Using a screwdriver, detach the 2 claws and remove the rear seat track cover RH.
HINT: Tape the screwdriver tip before use.
5. REMOVE REAR INNER SEAT TRACK COVER RH
6. REMOVE FRONT SEAT ASSEMBLY RH
a. Operate the power seat switch knob and move the seat to the rearmost position.
b. Remove the 2 bolts on the front seat track bracket.
c. Operate the power seat switch knob and move the seat to the position farthest forward.
d. Remove the 2 bolts on the rear seat track bracket.
e. Disconnect the cable from the negative (-) battery terminal.
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.