IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1778004.png)
28. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY
(a) Remove the roof antenna pole sub-assembly by turning it in the direction indicated by the arrow shown in the illustration.
29. REMOVE ANTENNA NUT
(a) Remove the antenna nut by turning it in the direction indicated by the arrow shown in the illustration.
30. REMOVE ANTENNA ORNAMENT
(a) Remove the antenna ornament.
31. REMOVE ANTENNA ASSEMBLY WITH HOLDER
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the nut and disengage the claw.
(d) Remove the antenna assembly with holder as shown in the illustration.
32. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY
(a) Disconnect each connector.
