IS 250C V6-2.5L (4GR-FSE) (2011)
2. Press the the seat cushion (front) angle switch down 3 times. Reference (a-1) in Figure 1.
3. Within 10 seconds, simultaneously operate seatback angle switch to the rear side and push UP on the vertical height adjustment switch until a beep
sound is emitted. Reference (a-2) in Figure 1.
4. Push the seat position control switch forward, sliding the seat to the full forward or most forward position until a beep sound is emitted. Reference
(b) in Figure 1.
5. Push the seatback angle switch forward moving the seatback angle to the foremost position until a beep sound is emitted.
6. Push the vertical height adjustment switch downward moving the seat to the down most position until a beep sound is emitted.
7. Repeat steps 2-6 to initialize the other front seat.