IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1886002.png)
16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
17. INSERT MAP DISC
(a) Remove the clock assembly.
(b) Turn the engine switch on (ACC).
(c) Insert the map disc.
(d) Check that the wire harness is in the position shown in the illustration.
Text in Illustration
(e) Engage the 2 craws and install the clock assembly.
18. ADJUST CLOCK
