IS 250C V6-2.5L (4GR-FSE) (2011)
Navigation Module: Service and Repair
Installation
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: INSTALLATION
1. INSTALL NAVIGATION ECU
(a) Install the navigation ECU with the 4 screws.
(b) Connect each connector to install the harness.
(c) Engage the clamp.
2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY See: Navigation System/Navigation Display/Service and
Repair/Multi-Display/Installation
3. INSTALL NO. 2 RADIO BRACKET See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Installation
4. INSTALL NO. 1 RADIO BRACKET See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Installation
5. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY See: Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Installation
6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
8. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
9. INSTALL INSTRUMENT PANEL COIN BOX (w/o Ashtray) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
10. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Installation
12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Installation
13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
14. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Installation
15. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Installation