IS 250C V6-2.5L (4GR-FSE) (2011)
Parking Assist Control Module: Service and Repair
Removal
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: REMOVAL
1. HALF-OPEN ROOF See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Roof Headlining
(for Front Side)/Removal
2. REMOVE REAR SEAT CUSHION ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
3. REMOVE REAR SEAT CUSHION ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
4. REMOVE PACKAGE TRAY TRIM GARNISH LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
5. REMOVE PACKAGE TRAY TRIM GARNISH RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
6. REMOVE REAR SEATBACK ASSEMBLY WITH CONSOLE BOX See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Removal
7. REMOVE CLEARANCE WARNING ECU
(a) Disconnect the connector.
(b) Remove the 2 nuts and clearance warning ECU.