Front Door Handle Replacement - Service and Repair | IS 250C V6-25L (4GR-FSE) (2011)
Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)
(b) Install the hole plug.
18. INSTALL DOOR GLASS FEMALE STABILIZER
(a) Using a T30 "TORX" socket wrench, install the door glass female stabilizer with the 2 screws.
Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)
(b) Install a new plate plug.
19. INSTALL FRONT DOOR WEATHERSTRIP
(a) Engage the 22 clips.
(b) Install the front door weatherstrip with the 4 clips.
20. INSTALL FRONT DOOR DIVISION BAR SEAL
(a) Engage the guide.
(b) Engage the 2 clips and install the front door division bar seal.
21. INSTALL FRONT DOOR FRONT LOWER FRAME UPPER COVER
22. INSTALL FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY