IS 250C V6-2.5L (4GR-FSE) (2011)
(c) Disconnect the connector and remove the hood lock assembly.
11. REMOVE DOOR SCUFF PLATE ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Removal
12. REMOVE FRONT DOOR OPENING TRIM COVER LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Removal
13. REMOVE INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal
14. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
15. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Disengage the 3 claws.
(b) Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
16. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Tie a string to the end of the hood lock control cable assembly as shown in the illustration.
Text in Illustration
NOTICE:
Use a length of string long enough to pass through the engine compartment.
(b) Disengage the clamp and remove the hood lock control cable assembly as shown in the illustration.