IS 250C V6-2.5L (4GR-FSE) (2011)
Trunk / Liftgate Switch: Service and Repair
Luggage Compartment Door Opener Main Switch
Components
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: COMPONENTS
Removal
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Removal.
4. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Removal.
5. REMOVE INSTRUMENT SIDE PANEL RH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal