IS 250C V6-2.5L (4GR-FSE) (2011)
4. REMOVE FRONT PILLAR GARNISH LH
(a) Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 claws and 2 clips.
(b) Disengage the guide and remove the front pillar garnish LH.
5. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
6. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side.
7. REMOVE FRONT PILLAR GARNISH RH
HINT
Use the same procedure for the RH side and LH side.
8. REMOVE MAP LIGHT ASSEMBLY
(a) Using a moulding remover, disengage the 4 clips.
(b) Disconnect the connector to remove the map light assembly.
9. REMOVE VISOR BRACKET COVER (for LH Side)
(a) Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.
10. REMOVE VISOR ASSEMBLY LH
(a) Remove the 2 screws and remove the visor assembly LH.