IS 250C V6-2.5L (4GR-FSE) (2011)
(c) Disengage the 4 claws and remove the roof headlining assembly as shown in the illustration.
Installation
INTERIOR PANELS / TRIM: ROOF HEADLINING (for Front Side): INSTALLATION
1. TEMPORARILY TIGHTEN ROOF HEADLINING ASSEMBLY
(a) Engage the 4 claws and temporarily tighten the roof headlining assembly as shown in the illustration.
2. INSTALL VISOR HOLDER (for LH Side)
(a) Engage the 2 claws.
(b) Push in the visor holder as shown in the illustration.
3. INSTALL VISOR HOLDER (for RH Side)
HINT
Use the same procedure for the RH side and LH side.
4. INSTALL ROOF HEADLINING ASSEMBLY
(a) Engage each clamp and install the 2 clips.