IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Insert the front end of the front door outside handle assembly into the front door outside handle frame.
(b) Insert the rear end of the front door outside handle assembly into the front door outside handle frame. Next, slide the front door outside handle
assembly towards the front of the vehicle to install it.
(c) Using a T30 "TORX" socket wrench, install the front door outside handle assembly with the screw.
Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)
(d) Connect the connector.
2. INSTALL FRONT DOOR LOCK CYLINDER ASSEMBLY (for Driver Side) See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly
3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Driver Side) See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly
4. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) See: Doors, Hood and Trunk/Doors/Front Door/Service
and Repair/Reassembly
5. INSTALL FRONT DOOR SERVICE HOLE COVER
(a) Install the front door service hole cover See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly.
(b) Connect the door side airbag sensor connector.
6. INSTALL FRONT DOOR TRIM COVER See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
8. INSTALL COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Vehicle Interior/Door Courtesy
Light/Installation
9. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver
Side) See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
10. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger
Side) See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side
Power Window Switch/Installation
11. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly
12. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSPECT SRS WARNING LIGHT