IS 250C V6-2.5L (4GR-FSE) (2011)
Power Mirror Control Module: Service and Repair
Removal
MIRROR (EXT): OUTER MIRROR CONTROL ECU: REMOVAL
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL See:
Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
4. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Vehicle Interior/Door Courtesy
Light/Removal
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly
6. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY
(a) Disconnect each connector.
(b) Remove the 2 screws and outer mirror control ECU assembly.