IS 250C V6-2.5L (4GR-FSE) (2011)
Seat Memory Switch: Technical Service Bulletins
Interior - Front Seat Memory ECU Initialization
L-SB-0093-10
August 9, 2010
Initialization of Front Seat Memory ECU
Service Category
General
Section
Pre-Delivery Service
Market
USA
Applicability
Introduction
As a result of the removal of the DCC fuse the "driving position memory" function of the driver and passenger side seat will be inoperative due to the
loss of seat position memory stored in the seat ECU. Use the following procedure to initialize the seat ECU after installing the DCC fuse during
Pre-Delivery Service (PDS).
Warranty Information
Initialization Procedure
1. Cycle the ignition switch to the "IG-ON" position.