IS 250C V6-2.5L (4GR-FSE) (2011)
Torque : 30 Nm (310 kgf-cm, 22 ft-lbf)
(b) Install a new clip.
Text in Illustration
NOTICE:
*
When installing the front flexible hose, face the identification mark to the outside of the vehicle and minimize twisting of the hose.
*
Install the clip as far as it will go.
(c) Using a union nut wrench, connect the brake line to the front flexible hose.
Torque : 15 Nm (155 kgf-cm, 11 ft-lbf)
NOTICE:
*
Do not bend or damage the brake line.
*
Do not allow any foreign matter such as dirt and dust to enter the brake line.
*
Use the formula to calculate special torque values for situations where the union nut wrench is combined with a torque wrench
See: Service Precautions.
2. INSTALL FRONT FLEXIBLE HOSE (for Opposed Type Caliper)
(a) Connect the front flexible hose to the disc brake cylinder assembly with the union bolt and a new gasket.
Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)
(b) Install a new clip.
Text in Illustration
NOTICE:
*
When installing the front flexible hose, face the identification mark to the outside of the vehicle and minimize twisting of the hose.
*
Install the clip as far as it will go.
(c) Using a union nut wrench, connect the brake line to the front flexible hose.
Torque : 15 Nm (155 kgf-cm, 11 ft-lbf)
NOTICE:
*
Do not bend or damage the brake line.
*
Do not allow any foreign matter such as dirt and dust to enter the brake line.
*
Use the formula to calculate special torque values for situations where the union nut wrench is combined with a torque wrench
See: Service Precautions.
3. BLEED BRAKE SYSTEM