IS 250C V6-2.5L (4GR-FSE) (2011)
Torque : 0.9 Nm (9 kgf-cm, 8 in-lbf)
(b) Install the tension spring to the parking brake control pedal assembly.
2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Install the parking brake control pedal assembly and temporarily tighten the 3 nuts.
(b) Fully tighten the 3 nuts in the order shown in the illustration.
Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)
(c) Connect the parking brake switch connector.
(d) Install the parking brake control pedal assembly to the body with the 3 nuts.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
(e) Install the instrument panel junction block assembly with the 2 nuts.