IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
OK:
Level's air bubble is within the red frame.
If the bubble is not within the red frame, use a screwdriver to adjust the bolt A until the level's air bubble is within the red frame.
HINT
*
The adjustable range within the red frame on the level is +/- 0.2°.
*
The target angle is +0.2° (upward angle of 0.2°).
Result:
(c) Adjust the reflector height.
Text in Illustration
(1) Adjust the reflector so that the center of the SST reflector is the same height as the millimeter wave radar sensor.
SST : 09870-60000
09870-60010
SST : 09870-60040
HINT
Prepare a 10 m (32.81 ft.) string, a string with a sharp-pointed weight (plumb bob), and a 5 m (16.41 ft.) tape measure.
(d) Place the reflector.
Text in Illustration