IS 250C V6-2.5L (4GR-FSE) (2011)
Distance Sensor: Service and Repair
Installation
CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION
1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Install the millimeter wave radar sensor with the 3 bolts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connector.
2. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
3. INSTALL RADIATOR GRILLE PROTECTOR See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
4. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Adjustments
5. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. ADD WASHER FLUID See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Installation
7. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT See: Lighting and Horns/Fog/Driving Lamp/Adjustments
8. PREPARATION FOR FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
9. INSPECT FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
10. ADJUST FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments