IS 250C V6-2.5L (4GR-FSE) (2011)
(b) Install the camshaft timing oil control valve with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTICE:
Be careful that the O-ring is not cracked or does not jump out of position when installing the oil control valve.
(c) Connect the camshaft timing oil control valve connector.
5. INSTALL INTAKE AIR SURGE TANK
(a) Install the intake air surge tank See: Intake Manifold/Service and Repair/Installation.