IS 250C V6-2.5L (4GR-FSE) (2011)
NOTICE:
Do not drop the chain into the gap between the engine and cover.
(c) Suspend the chain with a string or equivalent.
19. SEPARATE CHAIN SUB-ASSEMBLY
(a) Turn the crankshaft counterclockwise and align the notch with the "0" timing mark of the timing chain cover.
(b) Remove the chain from the sprocket of the camshaft timing gear and set it on the camshaft timing gear.
CAUTION:
As the camshaft may turn suddenly and pinch your fingers when the chain is removed, pinch the chain and lift it upward to remove it
from the sprocket.
20. REMOVE CAMSHAFT BEARING CAP (for Bank 2)
(a) Remove the bolts and bearing caps in the order shown in the illustration. Immediately after removing bearing caps, install service bolts and
washers in the order shown in the illustration.
Text in Illustration
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)