IS 250C V6-2.5L (4GR-FSE) (2011)
(e) Apply adhesive to 2 or 3 threads of the 8 bolts.
Text in Illustration
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
(f) In several steps, uniformly install and tighten the 8 bolts in the sequence shown in the illustration.
Torque : 83 Nm (846 kgf-cm, 61 ft-lbf)
NOTICE:
Do not start the engine for at least 1 hour after installation.
4. INSTALL MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)
HINT
See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Transmission
Assembly/Installation.
5. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
(a) Install the automatic transmission assembly for A960E See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement/A960E Automatic Transmission/Transmission Assembly/Installation.
6. INSPECT FOR OIL LEAK