IS 250C V6-2.5L (4GR-FSE) (2011)
Front Crankshaft Seal: Service and Repair
Installation
4GR-FSE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: INSTALLATION
1. INSTALL TIMING CHAIN CASE OIL SEAL
(a) Apply MP grease to the lip of a new oil seal.
NOTICE:
Keep the lip free of foreign matter.
(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.
SST : 09223-22010
SST : 09506-35010
NOTICE:
*
Keep the lip free of foreign matter.
*
Do not tap the oil seal at an angle.
2. INSTALL CRANKSHAFT PULLEY
(a) Install the pulley set key to the key groove.
(b) Align the pulley set key with the key groove of the pulley, and slide on the pulley.
Text in Illustration