IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTICE:
Be careful not to allow the O-ring to get caught between parts.
(c) Connect the 5 hoses.
4. INSTALL WATER PUMP PULLEY
(a) Temporarily install the pulley with the 4 bolts.
(b) Using SST, hold the pulley and tighten the 4 bolts.
SST : 09960-10010
09962-01000
09963-00700
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
5. INSTALL NO. 2 ENGINE COVER See: Service and Repair/Removal and Replacement/Engine Unit/Installation
6. INSTALL INJECTOR DRIVER See: Powertrain Management/Computers and Control Systems/Secondary Injector Control Module/Service and
Repair/Installation
7. INSTALL NO. 1 ENGINE COVER See: Service and Repair/Removal and Replacement/Engine Unit/Installation
8. CONNECT RADIATOR HOSE
(a) Connect the No. 1 radiator hose and No. 2 radiator hose to the radiator assembly, secure them with the clips.