IS 250C V6-2.5L (4GR-FSE) (2011)
Blower Motor: Overhaul
Disassembly
HEATING / AIR CONDITIONING: BLOWER UNIT: DISASSEMBLY
1. REMOVE INLET CONTROL SERVO MOTOR
(a) Detach the claw and remove the lever.
(b) Remove the 2 screws and inlet control servo motor.
2. REMOVE CLEAN AIR FILTER
(a) Detach the 2 claws and remove the air filter.
3. REMOVE COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and fan motor.
Reassembly
HEATING / AIR CONDITIONING: BLOWER UNIT: REASSEMBLY
1. INSTALL COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY