IS 250C V6-2.5L (4GR-FSE) (2011)
Compressor HVAC: Overhaul
Disassembly
HEATING / AIR CONDITIONING: COMPRESSOR (for 4GR-FSE): DISASSEMBLY
1. REMOVE MAGNETIC CLUTCH ASSEMBLY
(a) Place the compressor and magnetic clutch in a vise.
(b) Using SST, hold the magnetic clutch hub.
SST : 09985-00260
(c) Remove the bolt, magnetic clutch hub and magnetic clutch washers.
HINT
There is no set number of magnetic clutch washers because they are used for adjustment.
(d) Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor.
NOTICE:
Take care not to damage the seal cover of the bearing when removing the snap ring.
(e) Disconnect the connector.