IS 250C V6-2.5L (4GR-FSE) (2011)
Evaporator Temperature Sensor / Switch: Service and Repair
Installation
HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION
1. INSTALL NO. 1 COOLER THERMISTOR
(a) Install the No. 1 cooler thermistor.
NOTICE:
*
Be sure to insert the thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
*
After inserting the thermistor, do not apply excessive force to the wire.
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
3. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
4. INSTALL AIR OUTLET CONTROL SERVO MOTOR See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
5. INSTALL AIR MIX CONTROL SERVO MOTOR (for LH Side) See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
6. INSTALL AIR CONDITIONING HARNESS ASSEMBLY See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
7. INSTALL COOLER EXPANSION VALVE See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
8. INSTALL AIR MIX CONTROL SERVO MOTOR (for RH Side) See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
9. INSTALL COOL AIR BY-PASS CONTROL SERVO MOTOR See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
10. INSTALL BLOWER ASSEMBLY See: Blower Motor/Service and Repair/Removal and Replacement/Blower Unit/Installation
11. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY See: Control Module HVAC/Service and Repair/Installation
12. INSTALL NO. 2 AIR DUCT See: Housing Assembly HVAC/Service and Repair/Overhaul/Reassembly
13. INSTALL AIR CONDITIONING UNIT ASSEMBLY
HINT
Refer to the procedure from Install Air Conditioning Unit Assembly See: Housing Assembly HVAC/Service and Repair/Removal
and Replacement/Installation.