IS 250C V6-2.5L (4GR-FSE) (2011)
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
25. SEPARATE LIQUID TUBE SUB-ASSEMBLY
(a) Disconnect the liquid tube sub-assembly.
(b) Remove the O-ring from the liquid tube sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
26. DISCONNECT HEATER WATER OUTLET HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the heater water outlet hose.
27. DISCONNECT HEATER WATER INLET HOSE
HINT
Use the same procedure for the heater water outlet hose.
28. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
29. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
30. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
31. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
32. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
33. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Removal
34. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
35. REMOVE INSTRUMENT PANEL COIN BOX (w/o Ashtray) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
36. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
37. REMOVE REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box/Removal
38. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box/Removal
39. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box/Removal
40. REMOVE CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Front