IS 250C V6-2.5L (4GR-FSE) (2011)
Climate Control Exhaust Gas Sensor: Service and Repair
Installation
HEATING / AIR CONDITIONING: SMOG VENTILATION SENSOR: INSTALLATION
1. INSTALL SMOG VENTILATION SENSOR
(a) Install the smog ventilation sensor with the bolt.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
(b) Connect the connector.
2. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation