IS 250C V6-2.5L (4GR-FSE) (2011)
Audible Warning Device: Service and Repair
Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: REMOVAL
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
NOTICE:
w/ Navigation System for HDD:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Removal
4. REMOVE FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Removal
5. REMOVE INSTRUMENT SIDE PANEL LH See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Removal
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
8. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Knee Airbag Assembly (for Driver Side)/Removal
9. REMOVE SKID CONTROL BUZZER ASSEMBLY
(a) Remove the clamp and skid control buzzer assembly.
(b) Disconnect the connector from the skid control buzzer assembly