IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
(b) Insert 2 precision screwdrivers (with a diameter of 1.5 or less) into the holes on both sides of the clock assembly at the angle as shown in the
illustration.
NOTICE:
Do not pry on the clock assembly with the screwdrivers as it may damage the clock assembly.
HINT
If precision screwdrivers are not available, use in-vehicle tools (part No. 09135-53010).
(c) Insert a screwdriver from the underside of the hazard switch, and pull and remove the clock assembly.
Text in Illustration
NOTICE:
Do not pry on the hazard switch with the screwdriver as it may damage the switch.
HINT
Tape the screwdriver tip before use.
24. REMOVE CLOCK ASSEMBLY (w/ Navigation System for HDD)
(a) Disengage the 2 clips and remove the clock assembly as shown in the illustration.