IS 250C V6-2.5L (4GR-FSE) (2011)
Oil Pressure Sender: Service and Repair
Removal
4GR-FSE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE INLET NO. 1 AIR CLEANER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
(a) Disconnect the oil pressure switch assembly connector.
(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.