IS 250C V6-2.5L (4GR-FSE) (2011)
Tire Pressure Warning Reset Switch: Service and Repair
Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION
1. INSTALL SATELLITE SWITCH SET
(a) Engage the 2 claws and install the satellite switch set.
(b) Install the No. 2 finish panel retainer with switch with the 3 screws.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
3. INSTALL SIDE INSTRUMENT PANEL LH See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Installation
4. INSTALL FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Installation
5. INSTALL DOOR SCUFF PLATE ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Installation
6. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure.