IS 250C V6-2.5L (4GR-FSE) (2011)
Horn: Service and Repair
Low Pitched Horn
Components
HORN: LOW PITCHED HORN: COMPONENTS
Removal
HORN: LOW PITCHED HORN: REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
2. REMOVE LOW PITCHED HORN ASSEMBLY
(a) Disconnect the connector.
(b) Remove the bolt and low pitched horn assembly.
Installation
HORN: LOW PITCHED HORN: INSTALLATION
1. INSTALL LOW PITCHED HORN ASSEMBLY
(a) Install the low pitched horn assembly with the bolt.