IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
(d) Disengage the guide and pin as shown in the illustration.
(e) Disengage the grommet and remove the rear combination light assembly.
Installation
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) Engage the grommet.
(b) Engage the guide and pin.
Text in Illustration
(c) Install the rear combination light assembly with the 2 screws.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(d) Connect the connector.
(e) Engage the 3 claws and install the rear light cover.
HINT