IS 250C V6-2.5L (4GR-FSE) (2011)
Tire Pressure Module: Service and Repair
Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Install the tire pressure warning receiver assembly.
(b) Install the bolt.
Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)
2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
HINT
Refer to the procedures from Install Integration Control Panel with Radio Receiver Assembly See: Accessories and Optional
Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Installation.
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
HINT
Refer to the procedures from Install Multi-display with Radio Receiver Assembly See: Accessories and Optional Equipment/Radio,
Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Installation.
4. REGISTER OF TRANSMITTER ID
(a) Register all transmitter IDs See: Tire Monitoring System/Testing and Inspection/Programming and Relearning/Registration.
5. PERFORM INITIALIZATION
(a) Perform initialization See: Tire Monitoring System/Testing and Inspection/Programming and Relearning/Initialization.
6. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Tire Monitoring System/Testing and Inspection/Scan Tool Testing and Procedures/Test Mode
Procedure.