IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Reconnect the CAN No. 1 J/C wire harness connector.
(b) Disconnect the CAN No. 2 J/C wire harness connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR OPEN IN CAN BUS MAIN WIRE (CAN NO. 3 J/C)
B -- CHECK FOR OPEN IN CAN BUS MAIN WIRE (GATEWAY ECU - CAN NO. 2 J/C)
A -- REPLACE CAN NO. 2 J/C
4. CHECK FOR OPEN IN CAN BUS MAIN WIRE (CAN NO. 3 J/C)
(a) Reconnect the CAN No. 2 J/C wire harness connector.
(b) Disconnect the CAN No. 3 J/C wire harness connector.
Text in Illustration