IS 250C V6-2.5L (4GR-FSE) (2011)
Air Flow Meter/Sensor: Service and Repair
Removal
4GR-FSE ENGINE CONTROL: MASS AIR FLOW METER: REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE ENGINE ROOM SIDE COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE MASS AIR FLOW METER
(a) Disconnect the MAF meter connector.
(b) Remove the 2 screws and MAF meter.