IS 250C V6-2.5L (4GR-FSE) (2011)
Accelerator Pedal: Service and Repair
Installation
4GR-FSE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION
NOTICE:
*
Avoid physical shock to the accelerator pedal.
*
Do not disassemble the accelerator pedal assembly.
1. INSTALL ACCELERATOR PEDAL
(a) Install the accelerator pedal with the 2 nuts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the accelerator pedal position sensor connector.