IS 250C V6-2.5L (4GR-FSE) (2011)
Crankshaft Position Sensor: Service and Repair
Installation
4GR-FSE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a coat of engine oil to an O-ring of the crankshaft position sensor.
(b) Install the crankshaft position sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the crankshaft position sensor connector.
2. INSTALL COMPRESSOR AND MAGNETIC CLUTCH
(a) Install the compressor and magnetic clutch See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal and
Replacement/Installation.