IS 250C V6-2.5L (4GR-FSE) (2011)
Navigation Module: Service and Repair
Removal
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL
1. EJECT MAP DISC
(a) Turn the engine switch on (ACC).
(b) Apply protective tape to the places shown in the illustration.
Text in Illustration
(c) Insert 2 precision screwdrivers (diameter 1.5 or less) into the holes on both sides of the clock assembly at the angle shown in the illustration.
NOTICE:
Do not pry on the clock assembly with the screwdrivers as they may damage the clock assembly.
HINT
If precision screwdrivers are not available, use in-vehicle tools (part No. 09135-53010).
(d) Insert a protective taped screwdriver from the underside of the hazard switch and pull and remove the clock assembly.
Text in Illustration
NOTICE:
Do not pry on the hazard switch with the screwdriver as it may damage the switch.
(e) Remove the 2 precision screwdrivers.
(f) Push the "MENU" button.
(g) Touch "Map DVD" on the navigation screen.
(h) Touch "EJECT DVD" on the navigation screen to eject the map disc.