IS 250C V6-2.5L (4GR-FSE) (2011)
Parking Assist Control Module: Service and Repair
Installation
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION
1. INSTALL CLEARANCE WARNING ECU
(a) Install the clearance warning ECU with the 2 nuts.
(b) Connect the connector.
2. INSTALL REAR SEATBACK ASSEMBLY WITH CONSOLE BOX See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Installation
3. INSTALL PACKAGE TRAY TRIM GARNISH LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
4. INSTALL PACKAGE TRAY TRIM GARNISH RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
5. INSTALL REAR SEAT CUSHION ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
6. INSTALL REAR SEAT CUSHION ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
7. CLOSE ROOF