IS 250C V6-2.5L (4GR-FSE) (2011)
Keyless Entry Module: Service and Repair
Installation
DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Engage the 2 guides.
(b) Install the door control receiver with the bolt.
(c) Connect the connector.
2. INSTALL FRONT PACKAGE TRAY TRIM BOARD See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal and
Replacement/Rear Seat Inner Belt Assembly/Installation
3. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly/Installation
4. INSTALL PACKAGE TRAY TRIM GARNISH LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
5. INSTALL PACKAGE TRAY TRIM GARNISH RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
6. INSTALL REAR SEAT CUSHION ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
7. INSTALL REAR SEAT CUSHION ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
8. CLOSE METAL TOP ROOF See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Roof
Headlining (for Front Side)/Installation